High Temp Lab Metal Filler (14oz)

High Temp Lab Metal Filler (14oz.)

LAB-METAL ready-to-use repair and patching compound. Aluminum-filled dent filler for thousands of repairs. “Spreads like paste, hardens into metal”, simply by exposure to air.

Lab-metal fills dents and flaws in metal and nonmetal parts easily and economically. Apply Lab-metal right from the can with a putty knife or similar tool. No two-component mixing or measuring is necessary, therefore there is no waste. Heat, special tools and specialized skill are unnecessary.

Lab-metal adheres to any clean and dry metal, wood, glass, plaster, porcelain and hard plastic surface. Its strong bond withstands vibration and other difficult conditions. Lab-metal hardens quickly without heat, providing a durable metal surface.

APPLICATION:

• Hi-Temp Lab-metal MUST be used if a part is to be exposed to temperatures above 425ºF for more than 20 minutes in duration (or multiple high-heat exposures).
• Hi-Temp Lab-metal MUST be used in powder coating processes running at temperatures above 425ºF.
• Hi-Temp Lab-metal MUST be applied in thin layers (1/4 inch) and allowed to air dry for A MINIMUM OF 24 HOURS, then heat cured. This will force any remaining solvent out of the repair(about 400F for about 1/2 hour depending on thickness of application). Instructions are guidelines for curing. Alternative cure times may be appropriate depending on the size of the application.